Starting Labels on a Row/Column

When using Label Print, you can choose to start generating the labels from a particular row and column, should only part of a sheet have been used. This is useful when you have printed labels onto a sheet already, but not used a full page. As an example, say you have used the first two rows on a sheet of labels. In this case, you can configure label print to start printing from the third row when the labels begin.

When you have chosen the label template and label style then clicked Run, another Print Labels box will show prompting you to specify where you wish to start printing from.

Select the column you wish to start on and at what row by entering this into the respective boxes. In this example, we wish to start printing from the third row so we have entered 3 into the Row box.

Click OK and the labels will be generated, starting on the third row.

If you are printing the labels it is likely you will need to ensure that your printing software does not alter the size/scaling of the labels to make sure they fit properly when they are printed out. An article in our knowledgebase recommends what to check should you experience this problem